Mellow VZ330 AWD KIT
$1,599.95
Kit contains
- 330 Frame kit
- 330 Cnc Al Awd motor mounts
- LDO linear rails
- Gates GT2 6mm belt “5m” and motion components
- Ldo Stepper motors
- 330 CnC Al Z Frame assembly
- Hardware kit screws/bearings/ etc
- 330x330x8mm build plate, Usable @320mm x 320mm
- 750w heat pad/ magnet/pei sheet
- Super 8 /Dsi 5″ screen
- x2 2209 “E/Z”, x4 HV external 5160 “X/Y”
- WS7040 x1 with 15mm tube
- LRS 350 24v x1 / LRS 350 48x x1
- 24v fan kit
- Enough wire to complete build
- Cnc Al Print head bracket
- Vz-Hextrudort-low Al / Vz-Hotend
- PC Panels
- DOES NOT INCLUDE RASPBERRRYPI/ PRINTED PARTS/ CnC HANDLES/ GUSSETS
- Description
- Additional information
- Reviews (0)
Description
Units have been ordered 6/15 -7/1 is ETA of reaching our location
VzBot Project GitHub
WHAT IS AWD
In a conventional CoreXY machine, a 2WD setup is used. This setup utilizes 2 stepper motors “A/B” at the back or front of the machine. Recently, the VzBoT project has adapted the AWD setup! This setup utilizes 2 motors on X, and 2 on Y, doubling the amount of motors for the XY plane. What are the advantages of this setup? Let’s go over them:
- Having two motors on one belt allows for a shorter effective belt length. This leads to less belt stretch, which usually gives better input shaper results.
- The maximum useable acceleration is about 1.5x higher compared to 2WD due to the added torque.
- More BRRRR Noise
Check out our Pre Order TERMS prior purchasing
Additional information
| Finish | Black, Brushed |
|---|
Reviews
There are no reviews yet.