Provok3d 90° Heater cartridges

Heaters capable of operating up to 550°C for extended periods of time. For printing high temperature thermoplastics. The cartridge has the wires exiting at a 90° angle from the casing with a strain relief.

Voltage: 24V

Power: Up to 65W

Max operating temp: 550°C.

Lead length: 1m Fiber glass

⚠️WARNINGS⚠️

– These heaters are more than capable of reaching temperatures that will soften aluminium blocks. These must only be used with a copper block. We also recommend coupling this with a copper nozzle, as the hardened nozzles will lose some hardness at these temperatures, and the copper will offer better thermal conductivity.